txt, C1326 Test Method for Knoop Indentation Hardness of

Advanced Ceramics

C1326：高级陶瓷努氏硬度测试法

C1327 Test Method for Vickers Indentation Hardness of

Advanced Ceramics

C1327高级陶瓷维氏硬度测试法

E3 Guide for Preparation of Metallographic Specimens

E3：金相样本准备指南

E7 Terminology Relating to Metallography

E3：金相学相关术语

E29 Practice for Using Significant Digits in Test Data to

Determine Conformance with Specifications

E29确定与规格说明一致性测试数据中使用数字有效位的常规

E74 Practice of Calibration of Force-Measuring Instru- ments for Verifying the Force Indication of Testing Ma- chines

E74力度测试仪器核定测试器力度显示的标度常规

E92 Test Method for Vickers Hardness of Metallic Materi- als3

E92金属材料的硬度测试

E122 Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

E122以特定精度估计一定状况下或者一定过程中样本大小的计算常规

E140 Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness

E140金属的关于布氏硬度、维氏硬度、洛氏硬度、表面硬度、努氏硬度和肖氏硬度之间的换算表

E175 Terminology of Microscopy

E175显微镜使用术语（显微术语）

E177 Practice for Use of the Terms Precision and Bias in

ASTM Test Methods

E177 美国实验材料学会（ASTM）关于精度和偏差率术语的使用常规

E691 Practice for Conducting an Interlaboratory Study to

Determine the Precision of a Test Method

E691关于指导一项多实验研究以确定一项测试法精准度的常规

E766 Practice for Calibrating the Magnification of a Scan- ning Electron Microscope

E766电子显微扫描放大率的标定常规

2.2 ISO Standards:4

国际标准化组织（ISO）标准

1 This test method is under the jurisdiction of ASTM Committee E00 on Metallography and is the direct responsibility of Subcommittee E00.00 on Micro- indentation Hardness Testing.With this revision the test method was expanded to include the requirements previously defined in E28.92, Standard Test Method for Vickers Hardness Testing of Metallic Material that was under the jurisdiction of E28.00

Current edition approved Aug. 1, 2001. Published August 2001. Originally approved in 1969. Last previous edition approved in 2000 as E384 – 10 ´2. DOI:

该项测试办法由美国实验材料学会关于金属学E00标准委员会管辖并由关于微型硬度测量E00.00标准小组委员会直接负责。在这次修订中该测试办法扩展到包括前标准E28.92中所定义的相关要求，属于标准E28.00范围的标准测试办法。

该测试办法最早是在1969年通过。现行版本是于2001年8月1日通过并于2001年8月发行。上次修订版是在2000年获准通过作为标准E384 – 10 ´2. DOI:10.1520/E0004-11执行。